Kit
200 g
Svævefly / Motorsvævefly
2-kanals model
Rocket udgave
Lilienthal 40 RC er en friflyvningsmodel, der også kan udstyres med en 2-kanals radioopsætning. Modellen kommer som byggesæt og kræver elektronik. Udover at være en hyggelig og letflyvende model, kommer byggesættet også med en sleeve, der kan rumme Klimas C2-P raketter til dem, der vil have lidt mere spænding.
PS! Produktteksten er maskineoversat fra norsk.
Brug raketmotorTre forskellige raketmotorer kan bruges: C2-P, D3-P eller D9-P.
Alle disse motorer tændes med en lunte, der tager 5-6 sekunder at udløse. Raketmotorer medfølger ikke D3-P er den mest behagelige at flyve med, C2-P giver dig mest flyvetid og D9-P er til den mere erfarne pilot, der gerne vil flyve i hyperdrive.
Specifikationer:| Vægt | 200 G |
| Vingefang | 1190 Mm |
| Længde | 830 Mm |
| Vingeareal | 19,6 Dm2 |
Nødvendigt tilbehør| Radio | 2+ Kanaler |
| Servo | 2 Stk |
| Elektrisk opsætning | ESC + Motor (motorsvævefly) |
Product details in english
The shapely model is a further development of the popular Lilienthal 32 free-flight model, which has always achieved very good placings in the youth competitions. With the Lilienthal 40 RC, upgrading with remote control is no longer a problem. The fuselage offers enough space for 2 micro servos, receiver and battery. A suitable servo board, linkages and Bowden cable tubes are already included in the kit. However, the model can also be built purely as a free-flight model and the RC components can be retrofitted at a later date. A tow hook is also included in the kit. As usual from aero-naut, all parts are precisely laser-cut. The leading edge of the model is already milled into shape - no grinding work is necessary here. The wing is glued together with preformed balsa parts using support ribs. The ears of the surfaces are already made with the appropriate V-shape, which then no longer has to be laboriously sanded down. With a wingspan of 1,190mm, a take-off weight of 190-220g is achieved, with or without RC components, depending on the configuration. The construction of the model is accompanied by the unique and youth-oriented 3D-style assembly instructions known from aero-naut models, which ensure rapid construction success. The model is approved and ideally suited for the youth competitions in the model flying associations. 190mm, a take-off weight of 190-220g is achieved, depending on the configuration with or without RC components. The construction of the model is accompanied by the unique and youth-oriented 3D-style assembly instructions known from aero-naut models, which ensure rapid construction success. The model is approved and ideally suited for the youth competitions in the model flying associations. 190mm, a take-off weight of 190-220g is achieved, depending on the configuration with or without RC components. The construction of the model is accompanied by the unique and youth-oriented 3D-style assembly instructions known from aero-naut models, which ensure rapid construction success. The model is approved and ideally suited for the youth competitions in the model flying associations.
Mere info på engelsk