T-Rex 600 tar her ett kraftig steg effektmessig og leveres nå med en 12S 750MX børsteløs motor! For å takle effekten er flere av drevene byttet ut til de nye sorte HD-drevene, og ramma er stivet opp og ekstra opplagring lagt til. Regulatoren er Castle Creations Ice2 HV 80.
T-Rex 600E DFC er ett elektrohelikopter i 600-størrelsen og har 600mm hovedrotorblader. Elektronikk som servoer, motorsett og flybarless-elektronikk følger her med. Denne versjonen har DFC-flybarless rotorhode som gir lavere tyngdepunkt, lavere vekt og dermed mer respons og presise bevegelser. Swashplaten er modifisert for sikrere bruk, og halemekanikken er nyutviklet med tanke på å minimere slark mest mulig.
T-Rex 600E DFC har akseldrift til halen, for best mulig respons og lavest effekttap. Ramma er i karbon og det samme er bladene, samt andre smådetaljer på helikopteret. Videre er helikopteret fyllt opp med CNC-freste aluminiumsdeler for best mulig styrke og lavest mulig vekt. Servoene er de velkjente DS615/DS655 som er digitale og leveres med metallgir så de også tåler en støyt, swashservoene er sterke og meget presise, mens haleservoen er superrask og også meget presis for best mulig halekontroll. Den børsteløse motoren er her på 530KV og har kraftig 6mm aksling, og kombinasjonen med Castle Creations 80A HV-esc gir en skikkelig effektbombe.
Det som trengs i tillegg for å fly, er 2stk 6S LiPo drivbatteri, sender og mottaker. I tillegg er småverktøy som pitchmåler og umbracosett nødvendig under montering, og lader må man ha for å få ladet batteriene.
The brand new T-Rex 600E PRO DFC is the result of ingenious engineering inspired by the art of modern industrial design. Matched with 3GX flybarless system, the new generation T-Rex 600E PRO DFC is a show of perfection..
Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot; highest spec 2mm thick carbon fiber plate with patented plastic integration techniques not only strengthen the structure, but also create a neat and clean look; Unique battery latch assembly for stronger mount and easier battery replacement.
A power upgrade system designed specifically to bump up the power output of T-Rex 600E Pro by 30pst by upgrading the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo charger was added to the helicopter, with dramatic increase of motor torque output, and near bulletproof governing speed of the rotor, while maintaining power consistency throughout the entire flight duration. In addition, the brand new spindle shaft design features enlarged diameter from 6mm to 8mm, with oversized M5x10mm spindle screws to increase the rigidity of the overall rotor head.
The unbelievable flying performance and control feel of the T-Rex 600E PRO DFC, along with 750MX(530KV) motor, makes this helicopter the creme of crop amongst all competitors!
- Length: 1160mm
- Height: 319mm
- Width: 210mm
- Main Blade Length: 600mm
- Main Rotor Diameter: 1347mm
- Tail Rotor Diameter: 260mm
- Motor Pinion Gear: 14T
- Main Drive Gear: 118T
- Autorotation Tail Drive Gear: 131T
- Tail Drive Gear: 34T
- Drive Gear Ratio: 1:8.42:3.85
- Weight(With Motor): 2840g
Accessories- T-REX 600E DFC Kits Set x 1set
- 600 3G Carbon Fiber Blades x 1set
- 95 Carbon Fiber Tail Blade x 1set
- 750MX Brushless Motor(530KV) x 1
- DS615 Digital servo x 3
- DS655 Digital servo x 1
- Castle ICE2 HV 80 Brushless ESC x 1
- 3GX Flybarless System x 1set
- 6A External BEC w/ 5.1V Two-way Step-down
Radio transmitter and electronic equipment required for assembly: - 1.Transmitter(6-channel or more, helicopter system)
- 2.Receiver(6-channel or more)
- 3.Pitch gauge or Digital Pitch Gauge
- 4.6S Li-Po 2600-4600mAh battery x 2 ( 3300mah suggested )
Features
Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.
3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futabas S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphical illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
With 3GXs built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutters.
Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.
3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.
Suitable for helicopter of all class from 250 to 800, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
3GXs rudder allows consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous way point flights as well as return home.