Fragtfri bestilling over 1.000 kr. Vi fortolder!
Udskriv produktark

XRay 808 1/8 Luxury Buggy m/conversion til 2009

Ikke længere lagerført
Årsagen kan være, at produktet er udgået af leverandøren, erstattet med et nyt produkt, eller har haft for lidt efterspørgsel. Eventuelle spørgsmål kan rettes til kunde service.
Produktinfo
Dele
Tip din ven
Anmeldelser

Produkt information

Her får man en pakke med X-Ray 808 2008 modellen, med gratis conversion-kit til 2009 versjon 350901. I conversionkittet er nytt karosseri, ny tank og mye mer. Så man får i tillegg en del ting dobbelt i denne comboen.

En ekstrem konkurransebuggy som kjører fra det meste. Bilen kommer som byggesett og settes sammen på to kvelder. Det er brukt mye metall og karbonfiber i oppbyggningen så den er meget lett og robust. Bilen kommer uten motor, hjul, potte og elektronikk så her kan man sette i det grommeste for å få mest glede av bilen. X-Ray bruker kvalitetsstål i byggingen og har ekstremt godt drivverk som starter med en clutchklokke som er større enn normalen og ender i CVD akslinger til alle hjul. X-Ray 808 har store hjullager i clutchklokka og store spesialkulelager i hjulopphenget så her får man en veldig slitesterk bil.

Informasjon på engelsk:
The XRAY 808. The ultimate vehicle concept molded and shaped into an extraordinary engineering masterpiece by the artisans at XRAY. Superior as ever? yet all new. The 808 throws down a challenge for you to drive it? race it? win with it. Answer the call? take the challenge. Experience a new form of fascination, undreamed-of driving enjoyment? performance and dynamic ability you can count on. Experience the all-new XRAY 808.

  • Chassis
    The all-new chassis was completely redesigned following the all-new weight distribution and centerline placement of internal parts for improved side-to-side weight balance. To obtain better stability, the chassis was elongated and along with the new suspension concept the front of the chassis is angled 10°.
    The chassis is CNC-machined from high-quality Swiss 3mm 7075 T6 hard-anodized aluminum, and is strategically machined in low-stress areas to make it as light as possible without affecting strength or rigidity. The chassis is hard anodized at XRAY?s own in-house fully robotic hardcoating line, ensuring a perfect hardcoated surface.
    Non-essential material below the engine, fuel tank, and diffs was removed to allow for the lightest weight and lowest possible center of gravity.
    The downstop setscrew area was greatly reinforced. All screw holes on the bottom of the chassis are countersunk, allowing for a very smooth chassis underside with no protruding screw heads.
    Strong composite side guards help protect the internal components.
  • All-New Suspension
    The most significant handling improvement was achieved by an all-new suspension components and geometry. The suspension concept was carried over from 1/10 electric off-road cars ? redesigned and adapted for 1/8 off-road, incorporating XRAY?s innovative ideas, and reducing the size of the components used. The suspension geometry was fine tuned to give the car super-easy handling in all racing conditions.
  • Length: 490mm
  • Chassis length: 400mm
  • Wheelbase: 319~330mm
  • Width: 308mm
  • Weight: 1869g
  • Approximate running weight: 3250g
    Drivetrain
  • Type: Full-time shaft-drive 4WD w/ center differential
  • Primary: Steel spur gear / clutchbell
  • Drive shafts: HUDY Spring SteelTM CVD drive shafts
  • Central shafts: HUDY Spring SteelTM Direct Connection Shafts TM
  • Differentials: Sealed, 6 gear, silicone-filled
  • Clutch: Aluminum 3-shoe
  • Bearings: Rubber-sealed
  • Gearing
  • Pinion: 10T front / rear
  • Crown gear: 43T front / rear
  • Clutchbell: 16T
  • Spur gear: 42T
  • Primary Ratio: 4.3:1
  • Final Gear Ratio: 10.37~12.33 (kit = 11.29)
  • Body, Tires, Wheels & Misc
  • Body: XRAY 808 body
  • Tires: Not included
  • Wheels: Not included, standard 17mm hub
  • Fuel tank: 120cc capacity with hypertonic tank lid and internal stone-type filter
  • Adjustment Possibilities
  • Standard Adjustment: Camber, front toe-in, wheelbase, rear anti-squat, front and rear roll center,
  • Ackermann
  • Optionally adjustable: rear toe-in, front kick-up, rear anti-squat
  • Also Included
  • Universal tool: For all nuts and turnbuckles

    Items Not Included
  • Engine, Exhaust system, Electronics (Radio, Receiver, Servos, Batteries), Wheels, Tires, Tools, Wheel tool, Receiver battery, Fuel, Switch, Start box, Glow heater, Paint, Charger
  • Flere så også med