Produkt information
Alt-i-en flyvecontroller og fartpilot i ét bord. F7 flight controller med MPU6000 gyro og plug-and-play kompatibilitet med DJI hd systemet. 25,5 mm monteringsafstand og en lav vægt på 8,8 gram. Den kommer med både XT60 og XT30 stik, 2 forskellige kondensatorer og diverse tilbehør.
PS! Produktteksten er maskineoversat fra norsk.
PS: Bemærk, at hvis du vil flyve med en højere spænding end 4S LiPo på DJI Air enheden, skal du have BEC derudover. Skal også aktiveres i Betaflight 4.3.0 eller nyere.
Hvad er nyt i V2?
RPM-filtrering kan bruges med JazzMaverick-firmware (BLHeli-M) og JESC.Optimeret kredsløbsdesign
Product details in english
What if you could get the combined MCU speed and ESC power of a big stack, but carefully arranged on a 25x25 whoop size board? That would be crazy right? Well, we just did it...
This is our new iFlight BEAST series AIO FCs for your ultimate build. A future proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimum size, minimum work.This could only be achieved by using BGA chipsets instead of ordinary QFP (big size) MCUs and ultra powerful Mosfets for almost any build. Solder your motor wires on and let´s go! DJI Plug&Play plug and so many UARTs most people wouldn´t even use em´ all. Compatible to digital and analog FPV, onboard Barometer for possible long range flights and much more. Unleash the beast!
FC // Beast H7 AIO V2
Specification:
MCU: BGA-STM32H743
Gyro: BMI270
Blackbox: 16Mb Onboard Flash
BEC output: 5V 2.5A
Barometer: NO
Micro-USB
OSD: AT7456E
Uart:5 (UART1?UART2?UART3?UART4?UART7)
FC Firmware?IFLIGHT_H743_AIO_V2
Mounting pattern: 25.5*25.5mm ?3mm
Dimensions: 32.5*32.5mm
Weight: 8.8g
ESC // 55A 2-6S
Specification:ESC // 55A 2-6S
Specification:Uarts: 5
Current Sensor: Yes
Input: 2-6S LIPO
Current scale: 100
Constant: 55A / Burst: 60A
BLHeli: BLHeli-S
Telemetry: no
ESC Firmware: G-H-30 BLS 16.7
Mounting pattern: 25.5*25.5mm/?3mm
Dimensions:?32.5*32.5mm
Mere info på engelsk
Dele
Find nemt delene
Dette produkt har PartFinder
Partfinder er designet til at gøre det så nemt som muligt at finde den rigtige del til produktet ved hjælp af eksploderede billeder og/eller styklister.
Åbn PartFinder
c
Dele du savner? Klik her!