Produkt information
iFlight Cidora SL5 er en 5-tommers freestyle drone og kommer her med DJI Air Unit klar samlet og klar til brug. Masser af god elektronik som XING 2207-motorer, SucceX-D F7 50A FC / ESC AIO-stak og sejt LED-logo. Dronen afsluttes, og kun antenner og propeller skal installeres, muligvis også en modtager, hvis DJI-fjernbetjeningen ikke skal bruges.
PS! Produktteksten er maskineoversat fra norsk.
For at flyve denne version har du brug for et batteri, radio og DJI FPV-beskyttelsesbriller. Via radio kan både DJI-fjernbetjeningen bruges, da der ikke er behov for en ekstra modtager, og andre mærker som FrSky og Spektrum kan vælges med en ekstra modtager monteret. Se anbefalet tilbehør. Både luftenheden og flykontrolleren bruger USB-C, ikke mikro-USB.
V2.1-versionen er blevet mere solid med en tykkere underdel og arme (+ 0,5 mm) samt en 2 mm længere akselafstand fra 215 til 217 mm. Ud over det kølige belyste iFlight-logo.
Bemærk!GoPro og vedhæftet fil er ikke inkluderet.
Inkluderet i pakken:Titan Cidora SL5 færdigmonteret med DJI Air Unit og kamera2 Sæt Nazgul 5140 propeller1 Sæt LED-lys2X DJI LHCP RP-SMA 5.8g FPV-antenne2X batteristropperGoPro TPU bundstativNødvendigt tilbehør:Batteri 6S 1050-1500mAhDJI HD FPV-beskyttelsesbrillerDJI fjernbetjening (tilstand 2) eller anden 6+ kanals radioModtager til alternativ radioOplader| Specifikationer | |
| Akselafstand | 217 Mm |
| Armtykkelse | 5,5 Mm |
| Nederste tallerken | 2,5 Mm |
| Topplade | 2 Mm |
| Størrelse | 166Mm * 139mm |
| Vægt | 445,4 G uden batteri |
| FC | SucceX-D F7 |
| ESC | 4In1 50A |
| Motor | XING 2207 1800KV (6S) |
Product details in english
PRODUCT DESCRIPTION
Having one of the most successful FPV companies link up with the global drone market leader, combining DJIs digital FPV system with our highest standards racing, freestyle and cinematic drones to create a HD pilot experience!
The Cidora SL5 V2.1 HD w/ DJI Air Unit BNF features the amazing new DJI FPV system, this quad makes flying FPV truly breathtaking. With the 720p video shown at 120fps through the goggles, DJI has set the bar at a new high for clarity and image quality in an FPV system. This frame offers a squashed X layout for maximum control, equipped SucceX-D F7(50A 4-in-1 ESC) stack and popular XING motors. Everything you just need to bind and fly!
Different power version (4S and 6S available) to fit most pilots requirements. Choose your receiver option to get your FrySky or Crossfire installed and ready to be bound to your radio.
Main Changelog V2.1:
LED illuminated LogoBottom carbon thickness increased from 2mm to 2.5mmArm thickness increased from 5mm to 5.5mmThe Wheelbase increased from 215mm to 217mmTPU parts are not compatible, color is different
Features?
Everything you need to bind and fly!Optimized weight distribution: DJI unit and Stack centered Equipped with SucceX-D F7(SucceX 50A BLHeli32 4-in-1 ESC) StackEquipped with the DJI FPV Air Unit -Bind and FlyButtery-smooth 720p 120fps FPV feedPre-tuned with smooth freestyle settingsFull 3K Carbon Fiber airframe with chamfered armsEquipped with XING 2207 motorsWeight: 445.4g without battery and GoPro mountLED illuminated Logo
PRE-TUNED & PRE-SETUP:
Dont worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesnt end in a mess!
Specifications:
Total Dimensions: 166*139mm (body dimension)Frame Wheelbase: 217mmBottom to top distance: 28mmArm thickness: 5.5mmBottom plate thickness: 2.5mmTop plate thickness: 2mmUpper(middle) plate thickness: 3mmCamera plate thickness: 2.5mm (included TPU inserts)SucceX-D F7 TwinG V2.1 FCSucceX 50A 2-6s BLHeli32 4-in-1 ESC Dshot1200XING 2207 1800KV(6S)/2450KV(4S)Nazgul 5140 propellersWeight: 445.4g (without battery and GoPro mount)
FC// SucceX-D F7 V2.1 TwinG
MCU: 216MHz STM32F722Gyro?2x ICM20689Baro: YESBlackbox?32MBBetaflight OSD: YESBEC: 5V 2.5A / 9V 2.5ACurrent sensor scale: 100Inverter for SBUS input (UART2-RX)Smartaudio & Tramp VTX protocol supportedBeeper pad : YesRSSI input pad: NoUARTs?5Motor outputs: 88 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)BLHeli32 Telemetry?RX5Input voltage?recommended 2-6S, MAX 8SFirmware Target: IFLIGHT_F722_TWINGMounting pattern: 30.5*30.5mm ?4mm with Grommets ?3mmDimensions: 36*36mmWeight: 7.5gUSB type-CProduct Link
ESC // SucceX 50A 2-6S BLHeli32 4-in-1 ESC
Dimension: 43*39mmMounting Holes: 30.5*30.5mm/?3mmWeight:14.4gVolts input: 2-6SSTM32F051 MCU, 48Mhz Runs BLHELI 32.X FirmwareCurrent sensor: YesTelemetry?SupportedBEC: NoSupports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.Target: iFlight-BL32-4IN1
Recommend Parts (Not included):
TPU 3D Printed Camera Mount for Gopro Hero 5/6/7/8/9 with ND8 Filter (LINK1) (LINK2) TPU 3D Printed Camera Mount for GoPro Session (LINK)
Recommend batteries (not included):
6s 1050mAh to 1500mAh (LINK)
Package Included:
1x Cidora SL5 V2.1 4S 6S FPV Drone - BNF1x DJI FPV camera1x DJI FPV Air Unit Module 2x DJI LHCP RP-SMA 5.8g FPV antenna2 sets x Nazgul 5140 propellers (Set of 4 - Color may vary)1 x 20*250mm battery strap (Color May Vary)1x 20*200mm battery strap (Color May Vary)1x GoPro TPU bottom stand incl. lock screwNOTE: The GoPro9 camera and TPU camera mount do not include.
Mere info på engelsk
Dele
Find nemt delene
Dette produkt har PartFinder
Partfinder er designet til at gøre det så nemt som muligt at finde den rigtige del til produktet ved hjælp af eksploderede billeder og/eller styklister.
Åbn PartFinder
c
Dele du savner? Klik her!