Produkt information
Mateksys F722-miniSE er en 20x20mm FC med OSD, den leveres med en 30mm monteringsplade, hvis du vil bruge den. FC håndterer 3-8s LiPo og har en BEC på 5V 2A.
PS! Produktteksten er maskineoversat fra norsk.
Specifikationer
MCU: 216MHz STM32F722RET6Bec: 5Vx2AVægt: 5 gSpændingsområde: 3-8s LiPoStørrelse: 20x20mm med 3mm huller, 2mm indsatser inkluderet.
Product details in english
FC Specifications
MCU: 216MHz STM32F722RET6
IMU: MPU6000 (SPI)
OSD: AT7456E (SPI)
Baro: Infineon DPS310 (I2C)
Blackbox: 32M-byte Flash memory (SPI)
5x Uarts (1,2,3,4,6) with build-in inversion
1x Softserial supported
8x Dshot/Proshot/oneshot outputs
1x I2C
1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
Vbat filtered output power for VTX, Switchable via AUX (modes tab-user1)
Dual Camera image switchable via AUX (modes tab-user2)
Convertible 20mm to 30.5mm mounting
Camera control: Yes
Smartaudio & Tramp VTX protocol: Yes
DJI OSD: Yes (any spare Uart Tx & Rx)
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
Additional ADC for INAV analog airspeed
Power
Input: 6~36V (2~8S LiPo)
BEC: 5V 2A
LDO 3.3V: Max.200mA
Battery Voltage Sensor: 1:10 (Scale 110)
No Current Sensor built-in, supports external current sensor of PDB/4in1
Firmware
INAV target: MATEKF722mini
BetaFlight unified target: MATEKF722mini(MTKS)
BetaFlight legacy target: MATEKF722SE
Physical
Mounting
20 x 20mm/?3mm with Silicon Grommets
20 x 20mm/?2mm with Silicon & Brass Grommets
30.5 x 30.5mm/?3mm with Conversion Plate and Silicon Grommets
Dimensions: 28 x 28 mm
Weight: 5g
Including
1x FC F722-miniSE
1x 20mm to 30.5mm conversion plate
6x Silicon grommets M4 to M3
6x Brass grommets M3 to M2
1x SH1.0_8pin cable 5cm
2x SH1.0_8pin connectors
Mere info på engelsk
Dele
Find nemt delene
Dette produkt har PartFinder
Partfinder er designet til at gøre det så nemt som muligt at finde den rigtige del til produktet ved hjælp af eksploderede billeder og/eller styklister.
Åbn PartFinder
c
Dele du savner? Klik her!