Produkt information
TopModel Element ARF er en 3,5 meter lang motorskinne, ARF leveres klar til montering af elektronik. Modellen har klapper og T-hale og er tegnet i original oracover.
PS! Produktteksten er maskineoversat fra norsk.
For at flyve har du også brug for motoropsætning, 6 servoer, modtager, modtagerbatteri og sender.
Servo valg kan være 4xHS-82/85, 1stk Graupner DES 428 og 1stk mikroservo (HS-5055MG). Eller tilsvarende.
Spændvidde | 350Cm |
Længde: | 180Cm |
Vægt: | 1,0-2,3Kg |
Fløj Load | 27.1-29.7G/dm2 |
Fløj område | 77,5Dm2 |
Et vingeprofil: | AG |
Product details in english
Kit Contents
Lightweight gel-coated white fiberglass fuselage and canopyThree-piece wing is made in balsa framework with wing joiner, leading edges and wing spar made of carbon and covered with Oracover®Lightweight wings are made in a balsa framework and covered with Oracover®Removeable tail surfaces are made in a balsa framework and covered with Oracover®Vinyl cnc cut stickersTop quality accessoriesComplet assembly manual with step by step illustrations
Element is indispensable for thermal flying.
The wing spars and leading edge from carbon fibre gives the wing enough strength and stiffness.
Many expert pilots will be particularly surprised by its excellent flight qualities, given by the thin wing airfoil and low weight.
Thanks to the long fuselage, the model has a calm and steady glide path.There are several possibilities how to mix the functions of the flaps (high performance thermal soaring, spot landing etc.).
With the recommended drive set, the performances are fantastics as well as when climbing (power) as soaring (lightness) and the flying time is counted in hours rather than in minutes!
The floating elevator is balsa framework with carbon spar and leading edge. The elevator is mounted on a fiberglass bed. Rudder and elevator are controlled by servo in the fin. The drive unit is designed so that it is possible to use 3S lipo battery.
Recommended equipment7 channel receiver4 micro servos for ailerons and flaps2 micro servo for rudder and elevatorMotor: MEGA Acn 22/30/3EController: 60-80A ( e.g. SPIN 66, XReg80 )Spinner: "turbo" Ø 40mm - No.0201559Propeller: 13/7" CAM FOLDING PROP Graupner/SJAccu: 3S LiPol 2,2-4Ah
The model is designed and manufactured in Czech Republic.
Mere info på engelsk
Dele
Find nemt delene
Dette produkt har PartFinder
Partfinder er designet til at gøre det så nemt som muligt at finde den rigtige del til produktet ved hjælp af eksploderede billeder og/eller styklister.
Åbn PartFinder
c
Dele du savner? Klik her!