Produkt information
Helio Spring IMU-F AIO
PS! Produktteksten er maskineoversat fra norsk.
Specifikationer:
Processorer: F4 & F3, STM32F405 & STM32F301
IMU: ICM 20601
OSD: Fuld Betaflight OSD-support
Motorudgange: Fuld DSHOT og MULTISHOT support.
Modtagersupport: PPM, S.Bus (inverter indbygget), DSM, HoTT, SRXL, CSRF, FPort klar. 5V eller 3,3V forsyning til modtageren.
Product details in english
Truly FreeingSupported by multiple open source flight controller software including ButterFlight?s 3.3+ most current technologies
Natively FastTrue 32khz processing without overclocking
IMU-F
Never before seen IMU-f system an advanced inline discrete filtered gyro that is transparent to the flight controllerWith a super clean discrete filtered gyro, more processing power is available for flight controller logic and future feature updates without causing slowdown or issues during flight
Helio GyroThe hardware contains both an f3 (IMU-F) and an f4. The gyro is a IMU 20601.
SpecificationsProcessors: F4 & F3, STM32F405 & STM32F301IMU: ICM 20601OSD: Full Betaflight OSD supportMotor Outputs: Full DSHOT and MULTISHOT support.Receiver Support: PPM, S.Bus (inverter built-in), DSM, HoTT, SRXL, CSRF, FPort ready. 5V or 3.3V supply for receiver.Telemetry Support: FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, SRXL, CSRF, FPort ready. Built-in inverter for FrSKY telemetry.Serial Ports: 5 full serial ports (UARTs). UART1 and UART2 have inverters for S.Bus and SmartPort telemetry.Buzzer Port: Dedicated port for 5V (100mA max) buzzers.Analog Inputs: Voltage sensing up to 26V, current and RSSI inputs (3.3V max).Power: VBAT up to 6s with voltage regulator 2.5A continuous 3.2A burst. Or 5v in (switchable with jumper pads)100% free of Jenova DNA
Mere info på engelsk
Dele
Find nemt delene
Dette produkt har PartFinder
Partfinder er designet til at gøre det så nemt som muligt at finde den rigtige del til produktet ved hjælp af eksploderede billeder og/eller styklister.
Åbn PartFinder
c
Dele du savner? Klik her!