Fantastisk combo bestående af Sidewinder 3 ESC og 1406-7700kv børsteløs motor. Sættet er bedst egnet til 1/10-skala med 2s LiPo, der vejer mindre end 2,26 kg, men kan også bruges på nogle lette terrængående biler i den nævnte skala med korrekt gear. Ikke egnet til 2WD eller 4WD Short Course. Både motor og ESC er vandbeskyttet til brug i fugtige miljøer *. Programmerbar med Castle Link (sælges separat).
PS! Produktteksten er maskineoversat fra norsk.
NB* Ikke beregnet til brug under vand. Hvis regulatoren bruges under våde forhold, skal du rengøre den med frisk vand for at fjerne snavs og tørre helt.
Tekniske bemærkningerSørg for at vælge batterier, der leverer nok A ved belastning. Castle anbefaler at bruge LiPo-batterier på 5000 mAh 30C eller mere til denne opsætning. Brug ikke NiMh-batterier i ekstreme indstillinger.
ESCIndgangsspænding | 2-3S LiPo; 7,2 - 9,6 V NiMh (7700kv motor er kun kompatibel med 2s LiPo) |
BEC-specifikation | 5,0 V fast, 2A |
Brems | Proportional |
Omvendt | Ja (kan deaktiveres til racing) |
ON/OFF switch | Ja |
Køleventilator | Fås separat |
Størrelse | 49 X 38 x 20 mm (LxBxH) |
Vægt | 55,5G |
Kontakter | 4Mm kvindelig motorkugle; uden batterikontakt |
MotorIndgangsspænding | 2S LiPo |
KV | 7700 |
Max RPM | 100000 |
Størrelse | 49,5 X 36 mm (LxD) |
Vægt | 193 G |
Aksel Længde | 15Mm |
Akseldiameter | 1/8 &Quot;(3,17 mm) |
Monteringshuller | M3 @ 25mm |
Køleventilator | Kan købes setarat |
Kontakter | 4Mm hankugle |
Product details in english
Sidewinder 3 with 1406-7700Kv sensored* brushless motor is the perfect waterproof** combo for 1:10 scale on-road vehicles running up to a 2S LiPo***. It sports updated circuitry for faster response time and improved reliability. This combo now comes with our new sensored* motor. While the sensored capabilities of the motor cannot be utilized with the Sidewinder 3, users will benefit as the sensored motor is rebuildable (parts available soon), and this design even allows modelers to replace damaged motor wires. The Sidewinder 3 Combo will give you exceptional response and performance right of the box!
This combo includes a Sidewinder 3 ESC and 1406-7700Kv sensored* motor. The 1406-7700kv motor is a great upgrade for 1/10th scale on-road cars for 2s use. It can also be used in some lighter off-road 1/10th stadium trucks and buggies with conservative gearing. NOT for use in 2WD or 4WD short course trucks.
Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market.
Sidewinder 3 combo includes:
Sidewinder 3 ESCCastle 1406 1Y 7700 Kv sensored* motorDrivers Ed and Guide Start Guide1/10th scale gearing chartDecal sheet
* Sensored capabilities of the motor cannot be utilized with the Sidewinder 3. If you require sensored operation you will need a sensored ESC like the Mamba X.
**Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.
***Brushed motors are recommended for rock crawlers (vehicles traveling 3-5mph.) Brushless motors are fine for use with rock racing. If your vehicle is going to be in a bound up situation, very slowly traversing rocks and obstacles, you are running a rock crawler. If you are constantly traveling at 5mph or higher, you have a rock racer.
Castle Link Compatible
With the optional Castle Link USB Programming Kit you can use your Windows PC to easily program your controller.
Adjustable settings include:Throttle curveBraking curveDrag brakeAuto LiPo cutoffPunch ControlReverse TypeMotor Type
Additional Castle Link benefits include:Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.Intuitive Demo Mode capability.Ability to save setup profiles for later use.
Technical Specs ESCInput Voltage Range: 2s - 3s LiPo; 6 - 8 cell NiMH (7700kv motor is limited to 2s)BEC Specifications: 5.0 volts fixed, 2 amps.<3>Operating Environment: Waterproof* design allows for use in nearly any environmentBrake: ProportionalReversible: Yes, but may be disabled for racing.On/Off Switch: YesCooling Fan: Available, but not includedESC Size: 49 x 38 x 20mm (LxWxH)ESC Weight (w/wires): 1.96 oz. (55.5 g)Connectors: 4mm female bullets for motor connection.Items Needed for Operation: Battery Connector required; Castle 4mm polarized connectors, Deans Ultra Plug, or Traxxas Power Connector recommended.Product Use Statements: *Although Sidewinder 3 is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC with clean water after exposure to corrosives or dirt. While the controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.Application Guidelines: 1/10th scale on-road cars for 2s use. Lighter off-road 1/10th stadium trucks and buggies with conservative gearing. NOT for use in 2WD or 4WD short course trucks. Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market.Recommended Motors: Combo includes Castle 1406-7700kv motor.Max. Recommended Vehicle Weight: No more than 4lbs with battery, ready-to-run.Programmability: Fully programmable Castle feature set using Castle Link USB adapter (sold separately) and freely downloadable Castle Link Windows software.Telemetry Link Capable: NoTech Notes: Not all LiPos are created equal, and surge ratings should never be used to determine a packŽs suitability for a brushless application. Use the CONTINUOUS C rating only. Brushless setups frequently hit 100+ amps in peaks. We strongly suggest using 5,000 mAh or larger LiPo cells with a discharge rating of at least 30C (or high quality 25C batteries such as Traxxas® Power Cells®). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.
Motor Technical SpecsInput Voltage Range: 2S LiPoKv: 7700Max. RPM: 100,000Size: Length: 49.5mmDiameter: 36mmWeight (w/wires): 193g / 6.8ozShaft Size: Length: 15mmDiameter: 1/8" (3.17mm)Mounting Hole Specifications: M3 @ 25mmCooling Fan: Optional, coming soon!Connectors: 4mm male Castle Bullet ConnectorsApplication Guidelines: 1/10th scale on-road cars for 2s use.Lighter off-road 1/10th stadium trucks and buggies with conservative gearing. NOT for use in 2WD or 4WD short course trucks. Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market.Max. Recommended Vehicle Weight: Up to 4lbsTech Notes: Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC. Water Resistant Design: Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.
Mere info på engelsk