Armatytan Mongoose er en let Racing-ramme fra Armattan. Med sin lave vægt på 67 g, integreret kameramontering og indstillinger til både top- og bundbatteri er dette en meget flot ramme for Race. I modsætning til hanen har den ikke livstidsgaranti.
Product details in english
When asked to describe the Mongoose, the owner of Armattan Quads simply said "Refined, but affordable." Without a doubt, that is the best way to describe this masterful frame.
The Mongoose is the newest entry into Armattans Lite series of frames, and is built to be inexpensive, strong, and light. While those descriptors often cant coexist, the Mongoose provides a unique package that truly encompasses them all. At 61 grams and less than $40, it is less than half of the weight and price of the fabled Armattan Chameleon. Even so, the high quality carbon fiber, aluminum, and stainless steel hardware provides a robust airframe that youll have to work to break.
One of the unique weight-saving features of this frame is the front standoff. By utilizing a piece of 3D CNCd aluminum, it combines the forward structure of the frame with the FPV camera mount. This will fit and protect any of the newer 19mm micro FPV cameras produced by the big manufacturers. Another feature of that standoff is that it continues down to help secure the arm. By doing this on each of the corners, the total number of bolts needed to assemble this stretched-x racer was reduced to 12.
Set and sunk between the 3mm arms is the stack provision for this frame. Either 30.5mm or 20mm flight controllers will be right at home, and either will easily able to accommodate multiple boards with the provided 23mm of headroom. Also, since the stack is set between the arms, swapping an arm will be a piece of cake. Remove 2 screws to take out the old, and put them back to install the new: no need to fiddle with the stack. And by the way, since the arms are a bit thinner at 3mm, motor bolts are provided so you can avoid running the risk of shorting your motor windings to your frame and releasing the magic smoke.
As you likely know, the debate between batteries mounted on top or bottom rages on. Thats why this frame can support batteries in either location. Itll even come with 2 custom LiPo protection pads to help keep your battery where it belongs. Lastly, the zip tie holes in the top plate provide a clean, solid mount for your VTX antenna. Theres much less cause to worry about snapping your SMA adapter when it isnt exposed to the dangers of a direct impact.
Included:
Iron:
4x 6mm M3(top plate mounting)4x 8mm M3(arms inner attachment)3x 10mm M3(arms outer attachment)4x Stailess steel sunk-nuts(holds the arms to the center plate + 2 spares included)4x 16mm M3 bolts (FC stack)2x 5mm M2 (cam mount)
Aluminum:
2x 20mm cam mounting standoffs2x 20mm standoffs
Nylon:
5x 6mm standoffs (FC stack)4x M3 nylon nuts (FC stack)
Carbon Fiber:
1x 2mm Top plate 1x 3mm Center plate4x 3mm Arms
Other:
1x Lipo strap1x Bottom foam pad1x Top foam pad4x Dog-bone landing pads1x Parts list
Recommended Components
Motor Sizes: 2306/2450kvESCs: 30aProp Size: 5"LiPo: 4-5S/1300mah
Mere info på engelsk