Produkt information
FMS T-28D v4 fremstillet i holdbar EPO med et vingespænde på 1,4 meter og leveres med en udtrækkelig base. Modellen leveres med PNP, hvilket betyder, at den mangler radio, modtager, batteri og oplader. Ellers er alt fra elektronik såsom børsteløs motor, ESC og servoer monteret. Næsehjulet er også styrbart. Modellen kræver let montering, og lim er inkluderet i pakken. Regulator leveres med dekanafbryder.
PS! Produktet kan afvige fra videoen.
Læs mereKlippet er tilføjet som relevant information til produktet, men er ikke nødvendigvis identisk. Indholdet i en produktvideo, testvideo eller anmeldelse kan afvige fra det produkt, der sælges. Dette kan gælde farver, specifikationer, versionsforskelle, regionale forskelle mv. Det er produktets navn, beskrivelse og billeder, du skal forholde dig til ved køb af varen.
OK
PS! Produktteksten er maskineoversat fra norsk.
Vinger: 1400mm
Længde: 1185mmFlyvægt: ca. 2.450 gServo: 9g Servo x 2, 17g Servo x 5Motor: 4258-KV650 Kraftig Out-løber Børsteløs motorESC: 70A børsteløs ESCPropel: 13X9 3 blad propeller med spinnerAnbefalet batteri: Li-Po 14.8V 2600mAh 25CAnbefalet radio: 6 kanaler
Product details in english
Overview
The FMS 1400mm T28 is going to get its fourth remarkable upgrade after it was launched three years ago. The 1400mm T28 V4 is coming!
No matter whether you had an FMS T28 or not before, the coming V4 is full of surprises. First of all, the foam ratio has been upgraded from EPO 40 to the lighter and larger EPO 52, which alleviates the airplane´s weight, without weakening the airplane. Moreover, the original oil paint which has an unavoidable negative side effect of corrosion has been replaced by the latest environmental water-based paint.
Let?s take a look at more upgrades below. The latest FMS multi-connector is also used for V4, which makes the assembly easy and simple while leaving the wires orderly and user-friendly. The 1400mm T28 V4 adopts the new design of ball linkage to remove the clearance and hit an accurate flight. The updated 4258 motor drives the power and speed around 30% higher. In addition, it could work with 4S, 5S, and 6S batteries to satisfy different customer requirements. Both front and rear landing gears are metal, with a shock absorption function for hard landings. In terms of construction and performance, the 1400mm T28 V4 is totally different to the old versions. It is certain that the latest version greatly enhances flight appeal. Don´t miss out on this thrilling experience.
New feature
· New upgraded 4258-KV650 motor and 70A ESC
· New technology lighter EPO foam
· New water painting for environmental protection
· Shock absorbing metal oleo front and main landing gear struts
· No more foam hinges! Nylon hinge material on control surfaces
· Screw-in servo pockets. No more glued in servos! A bad servo can be replaced with 2 screws
· Digital metal gear servos throughout
· Ball links on all control surfaces
· Easy, single wire quick connectors to remove the wings
· Slide out battery tray for easy battery changes
Mere info på engelsk
Dele
Find nemt delene
Dette produkt har PartFinder
Partfinder er designet til at gøre det så nemt som muligt at finde den rigtige del til produktet ved hjælp af eksploderede billeder og/eller styklister.
Åbn PartFinder
c
Dele du savner? Klik her!