Produkt information
Portal Aksler
4WD 300 / 313mm crawler
TC80 dæmpere
MST CFX-W 1/8 leveres her som et sæt uden karosseri, men med motor og hastighedskontrol. Dette er en strakt version af CFX, men har opgraderinger, der gør det til en meget kapabel crawler. Den vigtigste opgradering er portalakslerne, der hæver det laveste punkt på bilen markant.
PS! Produktteksten er maskineoversat fra norsk.
Det er med crawler-børstemotor og hastighedskontrol, men andet radioudstyr, elektronik og karosseri er ikke inkluderet.
Specifikationer| Bredde | 230Mm |
| Hjulbas | 300Mm/313mm |
| Frihøjde | 55-80Mm |
| Dækstørrelse | 40X120mm |
| Motor | M54-35T børstet |
| Dæmper typen | Olie dæmpere |
| Radio Udstyr | Ikke inkluderet |
TC80 dæmpereMed TC80-dæmpere i dette sæt får du 18% øget "flex" i forhold til forgængeren. Dette resulterer i endnu bedre tilgængelighed.
Product details in english
The MST CFX-W Kit is a high performance scale truck designed to deliver incredible performance. With features that include heavy duty steel CVA front driveshafts and 40deg of steering angle, combined with steel gear portal axles and 4 link suspension - the CFX-W is a scale rig that can go anywhere the other guys can do and surpass them. Read on to discover why the CFX-W is the ultimate kit for enthusiasts looking for their next project.
The CFX-W features a forward mounted motor, with a planetary gear transmission and transfer case system that creates a gear reduction ratio perfect for crawlers. With steel gears and bearings throughout the transmission the CFX-W will transfer power from the motor to the axles smoothly and efficiently. The portal axles provide 55mm of ground clearance at the pumpkin, helping to create the clearance you need to scale those tricky technical sections where you competition gets hung up. The portal gear boxes are steel geared as well for durability.
A rear mounted battery and electronics plate helps to balance out the weight bias of the forward mounted motor and transmission, and large 4.72 diameter scale pattern tires keep the truck planted. Combine this with an axle mounted steering servo and aluminum links and you have an incredibly capable platform available at an affordable price point. All these features combined make the CFX-W a great choice for both pure scale and high performance builds.
NOTE:
MST classifies this truck as 1/8 scale, but the wheelbase and track width are similar to 1/10 models from other manufacturers. See specifications below for a full listing of measurements.
300mm Wheelbase fits 11.8" wheelbase bodies
The kit includes the parts needed to extended the wheelbase from 300mm to 313mm.
Specifications:
Wheelbase: 300mm
Width: 230mm
Gear Ratio: 1:36.3 - 1:53.4
Tire Width/Diameter: 40 x 120mm (4.72 OD)
Approach Angle: 67deg
Departure Angle: 67deg
Break Over Angle: 55deg
Ground Clearance: 80mm
Needed to Complete:
7.4V - 11.1V LiPo Battery & Compatible Charger
Transmitter & Receiver (2 Channel minimum)
High Torque Steering Servo
1/10 540 ESC & Motor (Crawler specific system recommended)
Mod 0.6 Pinion Gear
CA Glue for Tires
Body to Fit 300mm/11.8" Wheelbase
Mere info på engelsk
Dele
Find nemt delene
Dette produkt har PartFinder
Partfinder er designet til at gøre det så nemt som muligt at finde den rigtige del til produktet ved hjælp af eksploderede billeder og/eller styklister.
Åbn PartFinder
c
Dele du savner? Klik her!