SAFE teknologi
Version 2 af den populære Carbon Cub med et vingespænde på 130 cm. Modellen kommer med BNF med SAFE-teknologi, som bl.a. hjælper dig med at holde den stabil under flyvningen ved at indstille grænser for tonehøjde og rulle samt en "panikafbryder", der korrigerer modellen ved aktivering.
PS! Produktteksten er maskineoversat fra norsk.
Carbon Cub BNF leveres fuldt bygget, men kræver nem installation, før du kan flyve. Elektronik som servoer, børsteløs motor og esc er samlet og modellen har også mulighed for at montere klapper og svæve, men dette kræver ekstra udstyr. Hvad der også er behov for er en DSMX-sender på 6+ kanaler, LiPo-batteri på ca. 2200mAh med IC3/EC3-stik og oplader.
Specifikationer| Længde | 865 Mm |
| Spændvidde | 1300Mm |
| Vægtfluer | 1023-1079Mm |
| Materiale | Skum |
Indholdet af kassen1 Hobbyzone Carbon Cub S 2 med elektronik1 Brugermanual
Product details in english
Introduction
Even if youve never flown a radio controlled (RC) aircraft before, the Carbon Cub S 2 is the most versatile, capable and easiest to fly scale RC airplane yet! Based on the Carbon Cub by CubCrafters, an upgraded and thoroughly modern iteration of the classic Super Cub, and equipped with Horizon Hobbys exclusive and innovative SAFE technology, this scale reproduction makes it possible for almost anyone to learn to fly successfully. And the addition of telemetry-capable and Smart components including an ESC, battery and charger (battery and charger sold separately for the BNF® Basic version), along with the option to add SAFE Plus® GPS-enabled technology and the Landing Assist Sensor (LAS), makes learning to fly even easier than ever before!
Features
The most capable, versatile and easiest to fly scale trainer based on the iconic Carbon Cub from CubCrafters
Equipped with exclusive SAFE® technology that helps prevent crashes and makes it easy to learn how to fly
Beginner, Intermediate and Experienced flight modes you can easily change between at the flip of a switch
Panic Recovery mode at the push of a button to prevent loss of control and crashes
Easily upgrade to SAFE Plus GPS-enabled technology to add AutoLand, Virtual Fence and Holding Pattern features
Optional and easy to install Landing Assist Sensor (LAS) available for smoother landings
Factory-installed servos, Spektrum flight controller and serial receiver
Powerful and efficient brushless power system including a 30A telemetry-capable ESC
Capable of aerobatic maneuvers including loops, rolls and upside down (inverted) flight
Robust landing gear with oversized tires for operation from a variety of surfaces
Quick and easy assembly?no glue or special tools required
Durable EPO construction thats tough yet lightweight
Optional floats available for flying from water
Full line of replacement/spare parts available
Practice flying this aircraft in the RealFlight® RC flight simulator
Overview
Welcome to the exciting world of RC (Radio Controlled) flight! If youve ever dreamed of taking to the skies, Horizon Hobby has you covered. We are committed to engineering aircraft that you can learn to fly with successfully even if youve never flown RC before. Every HobbyZone® aircraft we offer features industry-leading design and technology developed by experts to keep you in control and learning at your own pace so you can turn your dreams of flight into a reality!
The HobbyZone® Carbon Cub S 2 is the easiest to fly, most capable and versatile scale trainer RC airplane yet! Its equipped with exclusive SAFE® (Sensor Assisted Flight Envelope) technology that helps to prevent overcontrol, loss of orientation and crashes so nearly everyone can learn to fly successfully. Beginner, Intermediate and Experienced modes allow you to choose the level of stability and control you need, or are ready to try, at the flip of a switch. And you can instantly return to steady flight using Panic Recovery with the push of a button in any flight mode. Oversized tires make it possible to take off and land on a variety of surfaces including thick grass, gravel paths, dirt trails and smooth pavement, or you can install the optional floats to fly from water?which adds to its unmatched versatility and capabilities.
The Carbon Cub S 2 is equipped with a 30-amp telemetry-capable ESC that provides a variety of real-time power system related telemetry data including motor RPM, current, battery voltage and more to compatible Spektrum? AirWare? equipped transmitters, and even approximate flight battery power remaining via multiple LEDs on the DXS transmitter included with the RTF version. The addition of exclusive Spektrum Smart components including a lithium polymer (LiPo) battery and charger make it more convenient to charge properly and safely (battery and charger sold separately for the BNF® Basic version). And you have the option to easily upgrade to SAFE Plus GPS-enabled technology that offers features such as AutoLand and Virtual Fence, along with the option to install the Landing Assist Sensor (LAS) that automatically "flares" for smoother landings, to make learning to fly?and to land safely?easier than ever!
The Ready-To-Fly (RTF) version includes everything needed to fly in one box, and is the perfect choice if youre a new RC pilot. From the Spektrum DXS 2.4GHz transmitter you can use with other Bind-N-Fly® (BNF) and BNF Basic aircraft after you learn to fly the Carbon Cub S 2, to the 3S 2200mAh Smart LiPo battery that delivers long flight times and the convenient S120 USB-C Smart charger that can be used with a variety of USB power sources, theres nothing extra you need to buy or provide! A BNF Basic version is also available for experienced pilots who want to use their favorite Spektrum transmitter along with batteries and chargers they may already own. And for both versions, the powerful and efficient brushless power system including a telemetry-capable ESC, plus the flight controller, receiver and servos, are all factory-installed in the durable EPO airframe that assembles quickly and easily without the need for glue or special tools.
Mere info på engelsk