Produkt information
BETAFPV 1S LiPo opladerplade med BT2.0-stik.
PS! Produktteksten er maskineoversat fra norsk.
Oplader op til 6 1s LiPo-batterier med BT2.0-stik. Opladning sker fra 3S eller 4S LiPo med XT60-stik.
Specifikasjoner
Vægt: 36,9 gStørrelse: 75x42x22mmInput: 3-4s LiPo
Product details in english
Compact, versatile and powerful, the battery chargers board is among the most popular pilots common tools. This charger board is customized for BT2.0 connector battery, while it is safely and easily charging packs.
Allow charging 6pcs BT2.0 Connector batteries at the same time, Individual charging per ports, not parallelYou could also use XT60 adapter or 3s/4s battery(XT60 Input) as supply power so you can continuously chargeTurns itself off when supply battery reaches safe low-voltage. 2 channels BEC for supply currentLED lights indicate when each battery is done charging
Note: If you plug battery with XT60 connector, please switch to corresponding Input voltage button. 3S battery-- 3S button, 4S battery-- 4S button. If you do not switch match button, it will unable to be charged. The power adapter can choose any Input voltage button.
Charger Board Specification
Weight: 36.86g?Dimensions: 75x42x22mm?Input: 3s - 4s SelectableCutoff Voltage: 10.8v (3s), 14.4v (4s) Output: Fixed at approx 400 milliamps4.20v cell charging cutoff for Lipo battery (+- 0.5% margin of error)4.35v cell charging cutoff for HV Lipo battery (+- 0.5% margin of error)
Mere info på engelsk
Dele
Find nemt delene
Dette produkt har PartFinder
Partfinder er designet til at gøre det så nemt som muligt at finde den rigtige del til produktet ved hjælp af eksploderede billeder og/eller styklister.
Åbn PartFinder
c
Dele du savner? Klik her!