Bardwell F4 leveres her i V2 version med 240A strømføler. Flyvelederen kan bruges med 3-6S LiPo. Dette er kun FC, hvis nogen ESC skal købes udenfor. Manual er ikke inkluderet i pakken, men kan downloades fra producenten.
Product details in english
The Bardwell F4 has been redesigned with V2 of the extremely popular Flight Controller. V2s 9v regulator and OSD circuit have been completely redesigned to make them as robust and reliable as possible. The current sensor max has been increased to 240 amps after reports that some users were exceeding the 130 amp maximum on previous boards (YOU BEASTS). The current sensor has also been factory calibrated so that you don?t have to go through a tedious manual calibration process to get your amps and mAh accurate. Finally, the 4-in-1 plug has been upgraded to support both analog current sense and ESC telemetry, for compatibility with all ESCs (reference pages 4/5 of the manual for setup info).
SPECS
3-6s F4, AIO board with MPU 6000 gyro
Superb board layout allowing for easy and clean builds
Joshua Bardwell authored manual and selected features, manufactured and backed by RaceDayQuads
4-1 Connector utilizes the full functionality of every 4-1 ESC on the market
RX4 pads gather telemetry from each individual ESC
Centrally located gyro
Betaflight OSD w/240a current sensor
Compact 30.5x30.5 board layout
9v filtered power out for VTXs ? very strong filtering capability for clean video (the 5v output is also filtered)
Power Out: 2x 5v, 1x 3.3v, 1x VBAT, 1x VTX filtered power (9v), 1x Camera filtered power (9v);
UARTS for FRSKY, SBUS, IBUS, SAT (2 inverted UARTS), TX6 pad added so there is one additional UART for general-purpose use
Smart Audio compatibility and Camera Control capability
Pre-flashed with BF 3.3.1 - Compatible with CLRACINGF4.hex
Programmable LED pin
Buzzer pins
Built-in Blackbox capability
Includes vibration dampeners
7.29g Weight
Mere info på engelsk