RunCam Night Eagle 2 Pro er det perfekte kamera til aftenflyvning
Product details in english
The RunCam Night Eagle 2 Pro is a black and white ultra-sensitive night flight camera. The Night Eagle 2 Pro has some notable improvements over the previous version. There is now a gain option to further increase visibility, but the biggest change from the NE to the NE2 is the removal of the dual-PCB. The NE2 now comes with just 1 PCB in the camera, removing the issues with disconnects between boards.
An OSD socket is included on the back of the case to make life simple. The camera supports both NTSC and PAL video format.
Improved Global Wide Dynamic Range (WDR) allows for better lighting transitions than the Eagle and most other traditional CMOS sensors. The RunCam Night Eagle 2 Pro has an even larger operating voltage range of 5 to 36 Volts, together with its compact dimensions make this camera a great option FPV use in any vehicle. On the Night Eagle 2 Pro, RunCam has also been able to reduce the latency to CCD levels at around 26ms on average.
The high-strength aluminum bracket allows you to easily mount your camera on most multi-rotor frames.
Note that this camera only outputs black & white, however, it is perfectly usable in full daylight.
Image Sensor: 1/1.8" CMOS SensorHorizontal Resolution: 800TVLLens: FOV 140 2.5mmScreen Format: 4:3Signal System: NTSC / PAL Switchable on OSD menuIntegrated OSD: YesIntegrated MIC: YesS/N Ratio: >50dBElectronic Shutter Speed: AutoMax Gain: 1-9Min. Illumination: 0.00001Lux@1.2FWDR: Global WDRDay/Night: Only Black & WhitePower: DC 5-36VWorking Current: 12V@90mA / 5V@200mAHousing Material: ABSNet Weight: 15gDimensions: L28mm*W26mm*H27mm
Included1 x RunCam Night Eagle 2 PRO FPV Camera 1 x Aluminum bracket1 x Set of screws 1 x 5pin FPV silicone cable1 x 3pin FPV silicone cable1 x 2pin extension cord for menu cable1 x Manual
Mere info på engelsk