Fragtfri bestilling over 1.000 kr. Vi fortolder!
HjemRadio udstyrHeliudstyrFlybarless
Udskriv produktark

Align MiniGRS Flybarless System

Produktinfo
Tip din ven
Anmeldelser

Produkt information

Flybarless system designet til Aligns mindre helikopter. Passer til modellerne 250, 450, 470 og 500.
PS! Produktteksten er maskineoversat fra norsk.

Specifikationer
Spænding:3.5-8.4V
Understøttede modtagere:ALIGN A10 (A.BUS), Futaba S-FHSS, DSM2/DSMX
Størrelse:37.6X22.4x13mm
Sensor Opløsning:12 BIT


Indhold
  • MiniGRS elektronikbræt sæt x 1
  • MiniGRS-signaltråd x 1
  • MiniGRS Binding Plus x 1
  • Plast skruetrækker sort × 1
  • Dobbeltsidet bånd x 1
  • Product details in english
  • Special design for ALIGN small helicopters. Its light and simple.
  • Support the latest new ALIGN A10 Radio (10-channel/A.BUS system) for the best working operation.
  • Support T-REX 250/450/470/500 models, no need to setup, outstanding flight performance for the beginner or 3D pilot.
  • Support JR DSM2 and Spektrum DSM2/DSMX satellite. Built-in Futaba S-FHSS 2.4GHz support for Futaba S-FHSS transmitter.


  • Specification:
  • Operating voltage range: DC 3.5~8.4V
  • Operating current consumption: <100mA @ 4.8V
  • Rotational detection rate: ±300°/sec
  • Rudder yaw detection rate: ±600°/sec
  • Sensor resolution: 12 BIT
  • Swashplate Support: 120° CCPM Swashplate
  • Mode Support: T-REX250, T-REX450, T-REX470, T-REX500
  • Receiver Support: ALIGN A10(A.BUS), Futaba S-FHSS, DSM2/DSMX
  • Operating temperature: -20? ~ 65?
  • Operating humidity: 0% ~ 95%
  • Comply with RoHS
  • Size: 37.6x22.4x13mm


  • Accessories:
  • MiniGRS electronics board set x 1
  • MiniGRS Signal Wire x 1
  • MiniGRS Binding Plus x 1
  • Plastic flat screwdriver black × 1
  • Double Sided Tape x 1
  • Mere info på engelsk
    Flere detaljer
    Del af PartFinder
    Flere så også med