Fragtfri bestilling over 1.000 kr. Vi fortolder!
Udskriv produktark

Airbot Wraith32 Metal V2 BLHeli_32 66A 2-6S ESC

Ikke længere lagerført
Årsagen kan være, at produktet er udgået af leverandøren, erstattet med et nyt produkt, eller har haft for lidt efterspørgsel. Eventuelle spørgsmål kan rettes til kunde service.
Produktinfo
Tip din ven
Anmeldelser

Produkt information

Airbot Wraith32 Metal V2 BLHeli_32 66A 2-6S ESC
PS! Produktteksten er maskineoversat fra norsk.

Specifikationer:
  • Arm 32bit MCU
  • Indbygget strømføler
  • Takler 2-6S LiPo
  • Designet til 66A stikkontakter
  • 15X35mm i størrelse
  • Vægt: 7g
  • Product details in english
    The Wraith32 metal is a new 32bit BLHeli ESC that comes with superior quality. Comparing to the standard Wraith32, the Wraith32 metal has following features:
  • The metal MOS has a better heat dissipation and gives more power.
  • More capacitors.
  • Better power supply lines
  • Better stability.
  • Better transmittion interface layout


  • BLHeli_32 is the third generation BLHeli code, following base BLHeli and BLHeli_S.

    BLHeli_32 runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there are MCUs out there that can run a lot faster.

    So what can the increased MCU speed do?
    First of all, it can run input signals with lower latency at faster rates.
    Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.

    Secondly it allows packing of more functionality.
    - Like programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them.
    - Like auto timing. Which is not the option to choose if you?re after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice.
    - Like voltage and current limiting. Which is implemented in the code, and will be supported on some ESCs. Voltage limiting is desirable for fixed wing crafts. And current limiting adds protection against ESC failure.
    - Like programmable brake on stop force. Which allows control of the braking of fixed wing props.
    - Like improved direction change in bidirectional mode.
    - Like more to come in the future. Such as setup from the FC by using Dshot commands. Such as telemetry functionality. There is room to grow performance and functionality.

    Features:
  • Build in Current sensor
  • On-Board RGB LED
  • 2-6s LIPO input
  • 65A designed
  • 15*35mm
  • Mere info på engelsk

    Produktanmeldelser

    reklamation trasig esc
    Bruger har kun givet karakter
    05.11.2019 af Michael
    måste säga att det gick kanonbra att reklamera. När en av esc´n visade sig att vara kass vid leverans.... Elefun glänser som dom brukar även när det visar sig att produkten inte höll måttet..
    Dette hjalp mig 1
    Viser 1 / 1 kommentarer
    Giv din feedback

    Flere så også med