Brutal motorkombo fra Caste indeholdende Mamba Monster 2 ESC og 1512-2650Kv børsteløs motor. Denne kombination er kompatibel med 2-4s LiPo og har vandtæt elektronik. Egnet til f.eks. 1/8 skala buggy på 4s LiPo med en vægt på 4 kg eller derunder. Programmerbar med Castle Link (sælges separat).
PS! Produktteksten er maskineoversat fra norsk.
NB* Selv med vandtæt elektronik er dette sæt ikke beregnet til undervandsbrug. Køleventilator ved ESC skal fjernes, når den bruges i våde omgivelser, da den ikke er vandbeskyttet (vær ekstra forsigtig ved temperatur uden ventilator).
Tekniske bemærkningerSørg for at vælge batterier, der leverer nok A ved belastning. Castle anbefaler at bruge LiPo-batterier på 5000 mAh 30C eller mere til denne opsætning.
ESC| Indgangsspænding | 2-6S LiPo (NB!Motor i dette sæt er kompatibel med max 4s LiPo) |
| BEC-specifikation | Justerbar 5-7V; standardindstilling 5.5V |
| Brems | Proportional |
| Omvendt | Ja (kan deaktiveres til racing) |
| ON/OFF switch | Ja |
| Køleventilator | Ja (aftagelig, vær ekstra opmærksom på temp, når du kører uden ventilator) |
| Størrelse | 56 X 47 x 34 mm (LxBxH) |
| Vægt | 111,5G |
| Kontakter | 6,5 Mm (hun) kugle til motor; uden batteristik (anbefalet 6,5 mm slotstik) |
Motor| Indgangsspænding | 2-4S LiPo |
| KV | 2650 |
| Max RPM | 60.000 |
| Størrelse | 68 X 39,98 mm (LxD) |
| Vægt | 370G |
| Monteringshuller | 3 Mm @ 25,4 mm |
| Køleventilator | Kan købes setarat |
| Kontakter | 6,5 Mm kugle (han) |
Product details in english
Brute Power and Sheer Stamina!
Mamba Monster 2 is capable of 2S LiPo to a maximum of 6S LiPo (4s maximum with included 2650kv motor). Its also waterproof*, so you can run your vehicle across the morning dew, through soggy snow, or just about anywhere else you´d be interested in running a 1:8 scale RC buggy or truck. It features an easy-access case allowing you to replace fans quickly, if necessary. Additionally, Mamba Monster 2 features solder posts, so changing battery wire length and direction is simple for an even more custom install.
Powerful Combination
This combo includes the Mamba Monster 2 controller and the Castle 1512-2650Kv sensored** motor, which features:
High quality oversized NMB bearingsSintered neodymium magnetsSuperior electromagnetic designReplaceable motor wires via Gold-Plated Solder Tabs
The included 1512-2650kv sensored** motor is intended for up to 4s operation in vehicles weighing less than 9lbs.
Package Includes:Mamba Monster 2 ESC1512-2650kv sensored** brushless motorCoupon for free Castle Link USB adapterDrivers Ed and Quick Start GuidesCastle decal sheet
*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.
** Sensored capabilities of the motor cannot be utilized with the Mamba Monster 2. If you require sensored operation you will need a sensored ESC like the Mamba Monster X.
Waterproof : YesTelemetry Capable : NoData Logging : NoAuxiliary Wire : NoMinimum Input Voltage : 2SMaximum Input Voltage : 4SSensored Capable : NoRecon G6 Certified ESC : NoROAR Certified ESC : No
Castle Link Compatible
With the Castle Link USB Programming kit you can use your Windows PC to easily program your controller. Adjustable settings include:
Auto LiPo cutoffMotor directionDrag brakeReverse typeMotor typePunch ControlBrake curveAnd many more.
Additional Castle Link benefits include:Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.Intuitive Demo Mode capability.Ability to save setup profiles for later use.
ESCInput Voltage Range: MIN: 2S LiPo MAX: 6S LiPo (4S max with 2650Kv motor)BEC Specifications: User selectable output between 5 and 7 volts; default 5.5 voltsOperating Environment: Waterproof* design allows for use in nearly any environment.Brake: ProportionalReversible: Yes, but may be disabled for racing.On/Off Switch: YesCooling Fan: Yes, factory equipped, fully removable** (see Product Use Statements below)ESC Size: 56 x 47 x 34mm (LxWxH)ESC Weight (w/wires): 3.93 oz. (111.5g)Connectors: 6.5mm female bullets for motor connection.Items Needed for Operation: Battery Connector required, 6.5mm Castle Connectors are recommended.Product Use Statements: *Although Monster 2 and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 15 lbs, with batteries, ready-to-run.Recommended Motors: Combo includes Castle sensored 1512 2650Kv: Max Cells: 4S Lipo or 12 NiMHMax. Recommended Vehicle Weight: Less than 15 lbs, with batteries, ready-to-run. (9lbs with included 2650kv motor)Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows software.Telemetry Link Capable: NoTech Notes: Not all LiPos are created equal, and surge ratings should never be used to determine a pack´s suitability for a brushless application. Use the CONTINUOUS C rating only. Mamba Monster setups frequently hit 100+ amps in peaks. We strongly suggest using 5,000 mAh or larger LiPo cells with a discharge rating of at least 30C (or high quality 25C batteries such as Traxxas® Power Cells®). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.
MotorInput Voltage Range: MIN: 2S LiPo; MAX: 4S LiPo (see Application Guidelines below)Kv: 2650Max. RPM: 60,000Motor Size: Length: 2.68" (68mm) Diameter: 1.57" (39.98mm)Shaft Size: Diameter: 5mm, Length: 20mmWeight (w/wires): 13.1 oz. (370g)Mounting Hole Specifications: 3mm screw holes @ 1" (25.4mm) spacing.Cooling Fan: Available, but not includedConnectors: 6.5mm male bullets.Application Guidelines: The ESC and motor are Intended for 4S (16.8 Volt) operation in Buggy and On road vehicles weighing 9lbs or less with batteries, ready-to-run.Max. Recommended Vehicle Weight: 9 lbs (with batteries, ready to run)Tech Notes: Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC. Water Resistant Design: Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.
Mere info på engelsk