Fragtfri bestilling over 1.000 kr. Vi fortolder!
Udskriv produktark

Hobbywing elektronisk afbryder - til alle formål

Ikke længere lagerført
Årsagen kan være, at produktet er udgået af leverandøren, erstattet med et nyt produkt, eller har haft for lidt efterspørgsel. Eventuelle spørgsmål kan rettes til kunde service.
Produktinfo
Tip din ven
Anmeldelser

Produkt information

Hobbywing ON / ON switch med "lavspænding" beskyttelse og vandtæt konstruktion. Forbinder f.eks. Modtager og modtagerbatteri. en nitro-bil.
PS! Produktteksten er maskineoversat fra norsk.

Specifikationer
BatteritypeLiPo/LiFe/NiMh
Indgangsspænding2S LiPo/2s LiFe/6V NiMh
Maksimal effekt12A
Størrelse26,5 X 19,7 x 10,5 mm
Vægt7,5G
Product details in english
  • Lipo Mode / NiMH mode selection
  • Low Voltage Indication for Lipo Mode
  • Battery capacity indicator
  • Waterproof
  • Thermal / Overheat protection: When the internal temperature of the electric switch goes above 100°C (212 °F) for about 2 seconds, the electronic power switch will enter the thermal protection mode. It will send a warning signal by LED indicator "***, ***, ***"
  • Over-current / Short-circuit protection
  • Trigger condition of the over-current protection: The current is between 20~39Amp and that lasts for about 500ms
  • Trigger condition of the short-circuit protection: The current is over 40Amp and that lasts for about 500µs.
  • When the over-current/short-circuit protection is activated, the electronic switch will automatically CUT OFF the output and enter the protection; and the POWER LED will blink RED in this way "**, **, **".
  • Battery polarity reversal protection: Note: It works when no load is connected to the switch.
  • Mere info på engelsk
    Flere så også med