Fragtfri bestilling over 1.000 kr. Vi fortolder!
Udskriv produktark

DJI Inspire 2 Part37 Billader

Ikke længere lagerført
Årsagen kan være, at produktet er udgået af leverandøren, erstattet med et nyt produkt, eller har haft for lidt efterspørgsel. Eventuelle spørgsmål kan rettes til kunde service.
Produktinfo
Tip din ven
Anmeldelser

Produkt information

Billader til Inspire 2. Måler temperatur og spænding på cigaretlighteren, så den kan stoppe opladning selv hvis det er nødvendigt. Opladningstid er omkring 2h 30min for to batterier og 3h 40min for radio. Opladeren bruges sammen med Inspire 2 batteriopladningsnav.
Product details in english
The Car Charger for Inspire 2 is used to charge the Intelligent Flight Battery or remote controller through a car?s cigarette lighter port. When charging the Intelligent Flight Battery, the Inspire 2 Intelligent Flight Battery Charging Hub is a must. It comes with low-voltage protection and overheating protection which automatically cut off charging if your starting battery voltage is too low or cigarette lighter port exceeds a certain temperature.

Highlights
The charge time for two fully charged batteries is 2.5 hours.
Low voltage protection
Overheating protection

In the Box

Specifications
  • Product Model: C6S90-2
  • Operating Temperature: 32° to 104° F (0° to 40° C)
  • DC Input: 12.3-16 V (Sedan) ; 25-30 V (Coach)
  • DC Output: 26.1 V; 3.45 A; 90 W
  • Charge Time*:
  • Two Batteries: Approx. 2 hr 30 min
  • Four Batteries: Approx. 5 hours
  • Remote Controller: Approx. 3 hr 40 min
  • * The charge time was tested in a lab environment at room temperature and should be taken as reference only.


  • Compatibility
  • Inspire 2
  • Inspire 2 - Battery Charging Hub
  • Mere info på engelsk
    Flere så også med