Produkt information
Jeti Power Ion RB 6200. Perfekt til at køre modtageren og servoer i din model. Batteriet leveres med en holder og leveres med to stikkontakter. En med MPX-stik og en med servostik.
PS! Produktteksten er maskineoversat fra norsk.
Specifikationer:| Mål med/uden beholder | |
| 104/70Mm |
| 47/39Mm |
| 50/40Mm |
| Vægt | 230/204G |
| Spænding | 2S 7.2V |
| Kapacitet | 6200MAh |
| Strømforsyning | 40/80A |
Product details in english
Power-Ion accumulators are battery packs suitable to power the receiver and servos in the model.
The main advantages of Power-Ion accumulators include high mechanical resistance due to their metal case. The accumulators are also characterised by a long cycle life. No balancer is needed for their operation and in case the current is higher than 150A, built in short circuit protection is activated. There is also built in overcharge protection which is activated if the charging voltage is higher than 5V per cell.
The Lithium Ion cells will work in very low or very high temperatures (-10 - +60°C). Each pack is provided with one two-wire cable with the JR connector for charging and with one two-wire cable with the MPX connector for connection to the model. Both cables are of the same length.
The packs are supplied in a plastic holder and are fastened to it with a Velcro strap. The case itself is screwed to a model using anti-vibration rubber grommets, please note the correct placing of the brass washer. Its wider part should be in contact with the assembly boardto which the battery case is mounted to avoid extruding the material.
Mere info på engelsk
Dele
Find nemt delene
Dette produkt har PartFinder
Partfinder er designet til at gøre det så nemt som muligt at finde den rigtige del til produktet ved hjælp af eksploderede billeder og/eller styklister.
Åbn PartFinder
c
Dele du savner? Klik her!